Multi-point lock with hooks KFV AS4540

Multi-point lock with hooks KFV AS4540

• • exterior door lock with 3 locking points - main lock bolt and auxiliary lock hooked bolts
  • all bolts and latches are handle-operated
  • the hooks lock from the bottom up thus providing high security even for doors that tend to warp, and making it difficult to force the door out of its frame 
  • high heat insulation and efficient sealing
  • suitable for both left and right hand doors
  • anti-intruder protection with multiple bolts
  • back-pressure and anti-sawing protection
  • tight seal provides sound and heat insulation
  • compatible with standard door hardware
  • same cutter type: B001, B003, B298
  • locks with handle
  • long light galvanised face plate with main lock and 2 auxiliary locks
  • main lock compatible with cylinder, latch is not key-retractable, bolt projection: 15 mm
  • main lock with lined holes for screws up to M6 - for fixing backplate into its place
  • 2 auxiliary locks, located on both sides of the main lock and fitted with hooked bolts locking from bottom up, hooked bolt projection: 20 mm
  • all locking components are bright nickel-plated, all lock cases - galvanised and closed
  • centre distance: 92 mm
  • spindle depth: 25 - 65 mm
  • spindle square: 8 mm
  • compatible with standard backplates and cylinders according to DIN 18254
  • standardised routing template
  • available finishes: light galvanised (face plate)

Locking from outside / inside

• lifting the handle up (1) locks the round bolts of the auxiliary locks
• turning the key 360° locks the deadbolt of the main lock and the handle is locked

Unlocking from outside / inside

• turning the key 360° unlocks the mechanism
• pressing the handle down (3) opens the door

Set
Separate strike plates

• central 15-530E + upper/lower 3615-530Q/31
• central 19-503 V +  upper/lower 3619-503V-31
• central SLK 881-083 A /DZM 402-00031 + upper/lower SLK 2600-267-2W/31
• central 8050-752ERH
•  upper/lower 2500-03-20R

Joint strike plates

• joint BD25-2-230ERQH/31 B001
• joint locking rail BS60-230ERQH/31

Milling sizes

Cutter type	A Total length (mm)	B Distance from handle centre to lower part centre (mm)	C Distance from handle centre to upper part centre (mm)	G Distance from handle centre to bottom (mm)	I Max face plate shortening from top (mm)	K Max face plate shortening from bottom (mm)
B001	2170	760	730	1020	290	130
B003*	2400	760	980	1020	270	130
B298	2170	760	605	1020	415	130

 *except for face plate P 6/22

---

---

Lietošanas instrukcija

Multi-point lock user manual (LV)

• •